A network refresh across a dozen sites is mostly a cutover project: new switches racked, firewalls configured, access points mounted, one site at a time. The old gear comes down in the same windows, and then it piles up in IDF closets, branch back rooms and the trunk of someone’s car.
Planning where the old equipment goes is a small part of the project, but it’s the part that tends to get skipped. Here’s how to keep it from becoming a mess.
If you’re retiring network gear from one location, our network equipment recycling guide covers the basics. This post is about doing it across many sites.
Treat network gear as data-bearing
Switches, routers and firewalls don’t hold customer files, but they do hold things you don’t want leaving the building: running configurations, local credentials, VPN keys, certificates, SNMP strings and a map of your internal network. Wireless controllers and some access points hold their own settings.
Before any device is released, your team should:
- Remove active configurations and saved startup configs
- Clear local accounts, keys, certificates and VPN material
- Release licenses and unlink devices from cloud management dashboards
- Note any device with internal storage (some firewalls and appliances have drives) so it can be handled as storage media
Doing this per site, as each cutover finishes, is much easier than doing it to a pile of mixed gear months later.
Inventory by site
A multi-site refresh needs a multi-site record. For each location, keep a simple list: model, quantity and serial numbers if you have them. That list does two jobs: it tells us what’s coming so we can plan the pickup, and it gives you a record per site when the project closes.
Keep model families together when you can, with their power supplies, modules, optics and rails. Grouped gear is faster to count and easier to evaluate.
Pick a pickup pattern
There are two common ways to run it:
- Consolidate. Each site sends its old gear to one central location (a warehouse, a main office or an MDF), and we pick up from there on a schedule.
- Pick up per site. We collect from each location as its cutover finishes. This works well when sites are spread across DFW and no one wants to haul gear between them.
Most refreshes use a mix: per-site pickups for the big locations, consolidation for the small branches, since a small site often won’t reach the 10-device minimum by itself. Tell us how your rollout is scheduled and we’ll suggest what makes sense.
What qualifies for free pickup
Free pickup is for business loads of usually 10 or more computers, laptops or network devices per site. Each location we pick up from needs its own 10, so plan per-site pickups for the bigger locations. Enterprise switches, firewalls and access points are exactly the kind of gear we want. Mixed loads with servers and computers qualify too.
What doesn’t qualify on its own: consumer-grade routers, damaged miscellaneous gear and cable-only loads. Cabling can ride along with an approved equipment load. UPS units in the closets can ride along too but don’t count toward the minimum. Not sure about a site? Send photos and we’ll tell you before anything moves.
Close it out site by site
When a site’s old gear has been picked up, mark it done in your project tracker with the date and the count. At the end you’ll have one record per site showing what left and when, plus documentation for any storage media we handled.
The short version
- Wipe configs and unlink cloud management as each site cuts over.
- Keep a model and quantity list per site.
- Choose consolidated pickup, per-site pickup, or a mix.
- Send photos for any site you’re unsure about.
- Close each site with a dated record.
We pick up network equipment across Dallas, Fort Worth, Arlington, Denton, McKinney and the rest of DFW. See network equipment recycling for what we take, or contact us with your rollout schedule.
Need IT Equipment Picked Up?
GreenIT Pickup provides free onsite pickup for qualifying B2B IT equipment loads across the Dallas-Fort Worth metroplex, so your team does not have to transport equipment to a drop-off.
Related Services
Related Articles
Chromebook Fleet Retirement: A Practical Guide for Texas Schools
A practical Texas school Chromebook retirement guide covering AUE dates, deprovisioning, data handling, documentation, reuse and bulk pickup.
IT RecyclingColo Exit on a Deadline: A DFW Cage and Rack Checklist
A colocation exit checklist for DFW tenants: notice dates, COI, escorted access, dock windows, data on the drives and getting the cage empty before the contract ends.
IT RecyclingComputer Recycling in DFW: Complete Guide
Looking for computer recycling near you in Dallas-Fort Worth? Here's where to recycle old computers, what to do with your data first, and how to do it for free.